How to read the markings of Liebherr built-in refrigerators?

Letters in the title built-in model of the Liebherr refrigerator are not abstract symbols: for each model of built-in or free-standing equipment, letters a set of options or a type of refrigerator is marked.

Marking the names of embedded models

The full name of the model consists of a series of Latin capital letters, possibly a few lowercase letters, then 4 digits followed by a hyphen 2 more digits.

The first letter indicates the type of embed:

I – equipment is built into the column.

E - marking for a wine cabinet - a double-glazed door or a built-in refrigerator 75-90 cm wide.

U - under the countertop.

Following the type of equipment:

С - refrigerator-freezer.

CU is a combi refrigerator-freezer, but the temperature is controlled only in the refrigerator compartment.

G - freezer.

K - cold storage.

WK – climate type wine cabinet.

SBS - Side-by-Side equipment.

WT – multi-temperature wine cabinet.

ZK – humidor.

The letter "B" in the name indicates the presence of the Biofresh section for  storage of vegetables, "N" - the automatic defrosting system  < strong>No Frost.

Small letters before numbers in the name:

S — the door closes like the Door Sliding system, slowly closes on the door closer.

R – energy efficiency class above 60% savings: A++ and A+++.

df- you will need to install a decorative panel.

es — the refrigerator is made of stainless steel.

gw - white glass.

gb - black glass.

Followed by 4 digits in the marking of the model name. Of them:

The first 2 digits, if multiplied by 10, are the total volume and binding to height and width.

The 3rd digit is the user equipment class: from 1 to 4 inclusive - Comfort class, 5-9 - Premium class.

4th digit - indicates the type of control and the number of temperature zones.

And the last 1 or 2 digits, separated by a dash, are the service index, which you will need to provide during warranty and service maintenance and ordering the necessary components.